|
|
|
|
NEW WARN 95ti THERMOMETRIC WINCH
The new 9.5ti packs 9500 lbs of pulling capacity into a massive 12.5 lb aluminum
die-cast body. The new shape not only looks great, but sheds the elements like
no other winch on the market: seals at the key points give extreme-duty water
resistance. A Gen II Bosch motor delivers just the right balance between torque
and speed. Plus another Warn Industries first - operator feedback - the
thermometric indicator gives the operator information about motor temperature
during the winching operation.
9.5ti THERMOMETRIC SPECS/PART NUMBERS:
Part Number: PN 67550
Rated line pull: 9500 lbs. (4310 kgs.) single-line
Motor: Gen II, Series Wound
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 89 lbs. (36.3kgs.)
Wire rope: 125', 5/16" diameter (30m, 8mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery leads: 2 gauge, 72" (1.83m)
Finish: Chromate with high-gloss powder coat
Nuts/bolts: PN 39570
CE winches: CE products are designed to meet European
Standards. CE winches include CE labels and Manuals.
12V DC PERFORMANCE SPECS:
| Line Pull Lbs.(Kgs.) 0 2000(910) 4000(1810) 6000(2720) 8000(3630) 9500(4310) |
Line Speed Ft./min.(M/min.) 62(18.9) 16.3(4.97) 11.8(3.60) 9.31(2.84) 7.59(2.31) 6.67(2.03) |
Motor Current 47 amps 160 amps 230 amps 305 amps 370 amps 425 amps |
Pull by layer: layer/Lbs(Kgs.) 1/9500(4313) 2/8650(3927) 3/7920(3595) 4/7400(3359) 5/6940(3150) |
Above performance specs are based on first layer of drum
Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H.
(587mm L. x 160mm D. x 254mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)