WARN 95si M.O.S.F.E.T. WINCH

NEW! WARN 95si M.O.S.F.E.T. WINCH
The 9.5si M.O.S.F.E.T. Diagnostic Control gives the user levels of control never before possible in a winch. As the M.O.S.F.E.T. Diagnostic Control performs the Power Out, Power In and Stop functions, it monitors key functions of the winch important to the field:

-Temperature of the motor signals should the motor temperature exceed the ideal operating temperature.

-Temperature of the M.O.S.F.E.T. Diagnostic Control unit to signal if the module is over its ideal operating temperatures.

-Over/Under voltage to assure that there is adequate battery power available.

The feedback of this monitoring process is communicated via the LED on the hand-held remote control.

9.5si M.O.S.F.E.T. SPECS/PART NUMBERS:

Part Number: PN 67600

Rated line pull: 9500 lbs. (4310 kgs.) single-line

Motor: Gen II, Series Wound^TM

Remote Control: 9.5si remote switch 12' (3.7) lead

Controller: M.O.S.F.E.T. technology with diagnostic capabilities

Geartrain: 3-Stage Planetary

Gear ratio: 156:1

Lubrication: Aeroshell #17

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 89 lbs. (36.3kgs.)

Wire rope: 125', 5/16" diameter (30m, 8mm diam.)

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery leads: 2 gauge, 72" (1.83m)

Finish: Chromate with high-gloss powder coat

Nuts/bolts: PN 39570

CE winches: CE products are designed to meet European Standards. CE winches include CE labels and Manuals.

12V DC PERFORMANCE SPECS:

Line Pull
Lbs.(Kgs.)
0
2000(910)
4000(1810)
6000(2720)
8000(3630)
9500(4310)

Line Speed
Ft./min.(M/min.)
62(18.9)
16.3(4.97)
11.8(3.60)
9.31(2.84)
7.59(2.31)
6.67(2.03)

Motor
Current
47 amps
160 amps
230 amps
305 amps
370 amps
425 amps

Pull by layer:
layer/Lbs(Kgs.)
1/9500(4313)
2/8650(3927)
3/7920(3595)
4/7400(3359)
5/6940(3150)

Above performance specs are based on first layer of drum

diagram
Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H.
(587mm L. x 160mm D. x 254mm H.)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)